Dometic Power Module PC Board 3316348.900 with reigniter (replaces 3850712013)

fits Dometic DM2XX2,RM2X51

This is the dometic power module board with re-ignitor and works with most models. Below is a list of the Dometic models that this board works with:

DM2652; DM2662; DM2663; DM2852; DM2862; DM3862; NDM1062; NDR1062; RM2351; RM2354; RM2451; RM2454; RM2551; RM2554; RM2620; RM2652; RM2662; RM2820; RM2852; RM2862.

Troubleshooting

Potential problems that a new power board could solve:

• Refrigerator not sensing AC power
• Refrigerator not sensing AC heating element
• Refrigerator not sensing a flame
• Refrigerator not powering on
• Refrigerator incapable of resetting
• Intermittent issues
• SR code display
• If any electrical burn marks are present anywhere on front or back of power board, you should replace it.

Installation

Time: 30 minutes or less

Tools:

• Ratchet set
• Screwdriver

Steps:

• Turn your battery switch to OFF
• Remove power board cover
• Take a picture of the board before disconnecting any wires
• Disconnect all wires and remove defective board
• Place new board on old board cover base and connect wires
• Before placing board cover on, turn battery switch ON and power up refrigerator to verify everything is connected and that there are no faults present. If everything is working, put cover back on.