Norcold Power Board 637082/ 636852 (fits the 2118 model)

This power board fits all Norcold 2118 model refrigerators regardless of the serial number. Both 637082 and 636852 are the same part number and fit all Norcold 2118 models.

The power board is located behind the refrigerator near the base. On the outside of your RV, you'll find an access panel door that you'll need to remove. Once you've removed the power board cover, you will be looking at this exact Norcold circuit board. We recommend taking a picture of the wires before removing anything to ensure that you connect everything back correctly.

Troubleshooting

Potential problems that a new power board could solve:

• Refrigerator not sensing AC power
• Refrigerator not sensing AC heating element
• Refrigerator not sensing a flame
• Refrigerator not powering on
• Refrigerator incapable of resetting
• Intermittent issues
• SR code display
• If any electrical burn marks are present anywhere on front or back of power board, you should replace it.

Installation

Time:

• 30 minutes or less

Tools:

• Ratchet set
• Screwdriver

Steps: 

• Turn your battery switch to OFF
• Remove power board cover
• Take a picture of the board before disconnecting any wires
• Disconnect all wires and remove defective board
• Place new board on old board cover base and connect wires
• Before placing board cover on, turn battery switch ON and power up refrigerator to verify everything is connected and that there are no faults present. If everything is working, put cover back on.