Norcold Upgraded Old Style Board 6212XX by Dinosaur Electronics

This upgraded circuit board by Dinosaur Electronics is made to replace several older style Norcold circuit boards. It replaces the Norcold 621271001, 621269001, 621267001, 621268001, 621270001, 619353, 619360, 619361, 628672 & 632168001. The list below details the specific models and serial numbers that this board works with.

• N410 and N510:
• fits all with a serial number below 9140558.
• N621 and N821:
• fits all with a serial number below 8970880.
• N410.3, N412.3, N510.3, and N512.3:
• fits all that have the 16 pin plug at the bottom of the board (pre 2006).
• N641, N642, N841, N842, N1095:
• fits all with a serial number below 9044285.
• N640.3, N640.3F, N641.3, N641.3F, N641.3WH, N841.3, N841.3BK, N841.3F, N841.3SS, N841.3WH:
• fits all N6/ N8 3 way models with a serial number below 8938727.
• 1200
• fits all 1200 models with a serial number below 8981138.

Troubleshooting

Potential problems that a new power board could solve:

• Refrigerator not sensing AC power
• Refrigerator not sensing AC heating element
• Refrigerator not sensing a flame
• Refrigerator not powering on
• Refrigerator incapable of resetting
• Intermittent issues
• SR code display
• If any electrical burn marks are present anywhere on front or back of power board, you should replace it.

Installation

Time:

• 30 minutes or less

Tools:

• Ratchet set
• Screwdriver

Steps:

• Turn your battery switch to OFF
• Remove power board cover
• Take a picture of the board before disconnecting any wires
• Disconnect all wires and remove defective board
• Place new board on old board cover base and connect wires
• Before placing board cover on, turn battery switch ON and power up refrigerator to verify everything is connected and that there are no faults present. If everything is working, put cover back on.