Norcold Board Kit / Controls Adapters Included 637779 (old 633292) Models N82X/ N62X
Every Norcold refrigerator has a specific power board and optical board. They are completely proprietary with eachother because they need to communicate back and forth. This kit will work on any N82X/N62X model refrigerator that has an obsolete optical board assembly. This is determined by the serial number located on a decal inside the refrigerator box. If your serial number is below 9126825, this is the kit you need. If your serial number is above 9126825, you need:
Norcold Optical Board 628974 (click)
Power Board w/ wire adapter
Lamp/thermistor wire (the jumper wire that goes across LI IN and LI OUT)
Installation instructions
- N621/N6213/N621F/N621SS
- N622 WINNEBAGO
- N623
- N624
- N820
- N821/N821BK/N821BKF/N821F/N821IM/N821V
- N822/N822F
- N823
- N824
32 Reviews
-
yippee the fridge works!
bought used 5th wheel from owner who did not know what a screw driver is. still fixing things that were bandaid and duck tape repaired. kit performed as advertised. directions a little confusing if you are not mechanical. limit switch jumper needs to be mentioned in directions. read everything FIRST. mark every wire as you go and you'll be ok. i'll be back.
-
Works like new
instructions are a little confusing (to many different models) be extra careful and it not to hard
-
Relief
Model 621 no worky on propane. Just sparked and quit. After futile attempts to resolve, found Seek Adv. LLC. and advice from Brian... Installed kit after following great instructions provided, Fridge operating like new! Couldn't be happier.
-
Works Perfect!!!
My Model 821 refer would not shut off. The kit arrived the next day and install was easy. Good job Norcold Parts Store.
-
Great price and product
Simple installation. Great price. Works perfectly.
Reviews
