Norcold Board Kit / Controls Adapters Included 637779 (old 633292) Models N82X/ N62X
Every Norcold refrigerator has a specific power board and optical board. They are completely proprietary with eachother because they need to communicate back and forth. This kit will work on any N82X/N62X model refrigerator that has an obsolete optical board assembly. This is determined by the serial number located on a decal inside the refrigerator box. If your serial number is below 9126825, this is the kit you need. If your serial number is above 9126825, you need:
Norcold Optical Board 628974 (click)
Power Board w/ wire adapter
Lamp/thermistor wire (the jumper wire that goes across LI IN and LI OUT)
Installation instructions
- N621/N6213/N621F/N621SS
- N622 WINNEBAGO
- N623
- N624
- N820
- N821/N821BK/N821BKF/N821F/N821IM/N821V
- N822/N822F
- N823
- N824
32 Reviews
-
Refrigerator Circuit Board Kit
Repair parts direct from the manufacture is always the most foolproof way to go. The price was reasonable. The delivery was faster than I anticipated. The installation manual was clear and easy to follow. Happy customer!
-
Right Parts
The parts came really fast , and was what I need to fix the refer. Great instructions easy to follow. thanks
-
Problem solved
The parts were easy to install and the instructions easy to follow. After the install I had an error code due to a supposedly open temperature limit switch. Customer Service informed me that I would need to put a jumper wire between the two pins on the board as my unit did not have this function. Would have saved a lot of time and effort if that "fix" was in the instruction sheet.
-
easy to install
I have N621 and this board was simple to install and within 20 minutes my fridge was up and running again. I had no problems and one should mark the wires on the old board as they are taken off. I was very pleased with this product compared to the price of other boards I had looked at. I would order from this company again because of the service and price.
-
Can not fiqure out how to hook new board up to N621 model
The installation instructions are not clear as to how to hook the universal board up. It does not match up to the old board. Still struggling on getting it to work properly. New board will not bring on gas valve. I wish that the instructions were better explained depending on the model fridge that you have. Please let us know if there is a tech that can help us through this. Norcold Tech: issue resolved
Reviews
