Norcold N20DCSS Circuit & Control Boards (front and back)

Daily use: ' + f.ah + ' Ah/day in warm weather × ' + cl.m + ' for your temperature' + (st.loads ? ' + ' + st.loads + ' Ah of other loads' : '') + '. A compressor cycles on and off, so it uses far less than its nameplate amps × 24 hours.
Solar: daily watt-hours ÷ (' + r.sun + ' sun hours × 75% real-world efficiency), rounded up to whole panels. Flat roof panels get less sun in winter.
Battery: daily use × ' + st.days + ' day' + (st.days > 1 ? 's' : '') + ' of backup ÷ ' + Math.round(r.batt.dod * 100) + '% usable capacity for ' + (st.batt === 'li' ? 'lithium' : 'AGM') + '.
Controller: panel watts ÷ 12V × 1.25 safety margin.

Circuit Boards (front and back)

Norcold N20DCSS Circuit & Control Boards (front and back)

The control boards run your Norcold N20DCSS: the control module/power board runs the compressor and fans, and the front board is the control panel you use to set the temperature. Common signs of a bad board are a dead or flickering display, a compressor that won't start, fault codes, or burn marks on the board.

Check fuses and your 12V supply first, then match the part number on your existing board to the board you order.

Can't find the part you need? Contact us with your model and serial number and we'll help you track it down.