/
Sale

DOMETIC®

Dometic Circuit Board 3851331011 (fits RM1350, RM3762, RM3962)

Write a Review
$449.95
$398.09
(You save $51.86 )
SKU:
3851331011
Condition:
New
Availability:
In Stock
Shipping:
Calculated at Checkout
Compatible Dometic Model #'s:
RM1350, RM3762, RM3962
Adding to cart… The item has been added

Description

Dometic Refrigerator Power Module Circuit Board 3851331011 – RM1350, RM3762, RM3962

This genuine Dometic power module board, part number 3851331011 (also written 3851331.011), is the main control board for the Dometic RM1350 Elite 2+2 and the RM3762 and RM3962 refrigerators. It's the brain of the refrigerator. It reads the thermistor and flame sensor, switches the AC heating elements, runs LP ignition, and talks to the control panel to select the energy source and hold temperature.

Problems a new power board can solve

  • The refrigerator doesn't sense AC (shore) power
  • It doesn't power the AC heating element(s)
  • It doesn't detect a flame in LP mode
  • The refrigerator won't power on or won't reset
  • Intermittent operation or fault codes on the display (such as "SR")
  • Visible burn marks or scorching anywhere on the board

Power surges are a common cause of board failure, especially without a surge protector. Before replacing the board, check its fuses, your 12V DC supply and the AC outlet. Dometic's RM1350 service manual lists a 3-amp DC fuse and a 5-amp AC fuse on the main control board, and an operating range of 9.6 to 22 volts DC.

Confirm your board before ordering

Dometic boards are matched to the full model and product number. Compare the part number on your existing board (or your refrigerator's parts list) with 3851331011 before you order.

Installation

  1. Turn the battery disconnect OFF and unplug the refrigerator from AC power.
  2. Remove the power board cover at the back of the refrigerator (through the exterior access vent).
  3. Take a photo of the board and all wire connections before disconnecting anything.
  4. Disconnect the wires and remove the old board.
  5. Mount the new board on the cover base and reconnect each wire exactly as in your photo.
  6. Before closing up, restore power and confirm the refrigerator runs without faults, then reinstall the cover.

Tools: ratchet/nut driver set and screwdriver. Takes about 30 minutes or less.

Fits these Dometic refrigerator models

Before ordering, confirm the fit by matching the part number on your old part or in your refrigerator's parts list. Not sure? Send us your refrigerator's model and serial number and we'll confirm the fit.

Browse all Dometic RV refrigerator circuit boards.

Product details

  • Brand: Dometic
  • Part number: 3851331011 (3851331.011)
  • Part type: Power module / main control board
  • Fits: Dometic RM1350, RM3762, RM3962 (verify by part number)
  • Overall dimensions: 5-15/16" L x 4-3/4" W x 2" T

FAQ

Do I need a technician?
No. This is a do-it-yourself replacement. If you're not comfortable getting hands-on with the refrigerator's wiring, you can always hire a technician to come out. If you need help with the install, we're here for you. Just reach out.

Dometic logo

Warranty Information

1 Year Manufacturer's Warranty

Recommended Products