/
Sale

Nordic Cooling Units®

Nordic Cooling Unit 6610 | replaces 634746 for 1200/ 1210 models (45 degree AC heater) - Dutchaire New Build

Write a Review
$2,299.99
$1,880.00
(You save $419.99 )
SKU:
6610
Condition:
New
Availability:
In Stock
Shipping:
Free Shipping
Adding to cart… The item has been added

Description

Nordic Cooling Unit 6610 for Norcold 1200/ 1210 Models with a 45 Degree AC Heater (replaces 634746)

Construction: New build (Dutchaire). This is a brand-new cooling unit, not remanufactured. Warranty: 3 years on new units.

The Nordic 6610 is a new-build Dutchaire replacement cooling unit for Norcold 1200, 1201, 1210 and 1211 refrigerators that use the newer style AC heating element with a 45 degree bend. It replaces Norcold cooling unit 634746.

Have the older 90 degree AC heater (Norcold 634747 cooling unit)? Order the Nordic 6600 (replaces 634747) instead.

Which 1200/ 1210 cooling unit do I need?

90 degree bend Norcold AC heater uses the Nordic 6600 cooling unit
90 degree heater: Nordic 6600
45 degree bend Norcold AC heater uses the Nordic 6610 cooling unit
45 degree heater: Nordic 6610 (this page)
Your AC heating elementNorcold OEM cooling unitNordic replacement
Older style, 90 degree bend634747Nordic 6600
Newer style, 45 degree bend634746Nordic 6610

Both units fit all 1200, 1201, 1210 and 1211 models. The only difference is the slot for the AC heating element. Check the bend on your AC heating element, or the Norcold part number on your old cooling unit, before you order.

Prefer the 6610 on a refrigerator with the older 90 degree heater? You can, but you must also replace the AC heater with the 45 degree Norcold AC heater, because the 90 degree heater will not fit this unit.

Fits these Norcold refrigerator models:

New-Build Replacement Cooling Unit

NTP-STAG and Nordic list this Dutchaire unit as a new build, not a remanufactured core.

Signs of a Failed Cooling Unit

  • Refrigerator does not cool on propane or electric
  • Yellow residue or ammonia smell at the back of the refrigerator
  • Boiler area gets hot but the refrigerator does not get cold
  • Cooling slowly gets worse over time even after the heaters, burner, thermistor and control board check out

Rule out the heating elements, burner, thermistor, control board and ventilation before replacing a cooling unit. They can cause the same symptoms.

Installation

Time:

  • 3-5 hours

Tools Needed: 

  • Screwdriver
  • Putty Knife
  • Thermal mastic (included with cooling unit)
  • Ammonia or mineral spirits

Steps:

  • Unmount the refrigerator from back mounting plate and front frame (if one exists).
  • Shut off and disconnect propane.
  • Disconnect the power board from AC power and DC connections.
  • Rock the refrigerator into the coach.
  • Inside freezer compartment, you'll need to remove the evaporator screws from the back plate (usually 8 of them).
  • Lay refrigerator face down on the floor on blankets.
  • Remove remaining screws from the back side of the cooling unit and remove cooling unit from refrigerator box.
  • With a putty knife, scrape off old thermal mastic until you have a clean surface.
  • Clean that surface with ammonia or mineral spirits.
  • Bead on new thermal mastic, using all mastic in the tubes provided.
  • Screws the cooling unit into place.
  • Reverse previous steps and reinstall refrigerator. 

Product Specifications

Manufacturer: Nordic Cooling Units (Dutchaire)
Part Number: 6610
Replaces Norcold: 634746
Fits: Norcold 1200, 1201, 1210, 1211 with 45 degree AC heating element
AC heater slot: 45 degree
Construction: New build, not remanufactured
Availability: In stock

*Cooling units are non-returnable. MAKE SURE the cooling unit is defective before ordering.

*FREE shipping!

Recommended Products