/
Sale

DOMETIC®

Dometic Electrode w/ Conductor 2932781012

(No reviews yet) Write a Review
$68.19
SKU:
2932781012
Availability:
In Stock
Shipping:
Calculated at Checkout
Compatible Dometic Model #'s:
DM2652, DM2662, DM2663, DM2852, DM2562, DM2862, DM3862, NDM1062, NDR1062, RM2351, RM2354, RM2451, RM2454, RM2551, RM2554, RM2620, RM2652, RM2662, RM2663, RM2820, RM2852, RM2862, RM3662, RM3663, RM3762, RM3862, RM3863, RM3962, RM4872
Adding to cart… The item has been added

Description

Dometic Refrigerator Spark Electrode with Lead 2932781012

This genuine Dometic spark electrode with an attached high-tension lead (conductor), part number 2932781012, is the igniter for LP gas operation on many Dometic absorption refrigerators. It fits most Dometic models where the high-tension lead is permanently attached to the electrode, including the DM/RM 2652, 2662, 2852 and 2862 families, NDR1062, and many RM23xx–RM39xx models.

What it does

In LP (propane) mode, the control board sends high-voltage pulses down the lead to the electrode. The electrode sparks across to the burner and lights the gas. If the electrode is cracked, worn or out of position, the burner won't light reliably.

Signs your electrode may need replacing

  • You hear clicking in gas mode, but the burner won't light
  • A "Check" light or LP fault code after several ignition attempts
  • The flame lights and then drops out
  • The ceramic insulator is cracked, or the lead is burned or brittle
  • No spark at the burner, even though the board is clicking

Installation tips

  • Turn the refrigerator off, shut off the LP supply and let the burner area cool.
  • Unplug the high-tension lead from the control board/igniter and remove the electrode from its bracket at the burner.
  • Install the new electrode in the same position. The spark gap to the burner must match the original. Check your model's service manual for the specified gap (typically about 1/8"–3/16").
  • Route the lead away from hot surfaces and plug it back in.
  • Tools: screwdriver or nut driver. Takes about 15–30 minutes, through the exterior refrigerator access vent.

Fits these Dometic refrigerator models

Before ordering, confirm the fit by matching the part number on your old part or in your refrigerator's parts list. Not sure? Send us your refrigerator's model and serial number and we'll confirm the fit.

Browse all Dometic burners, gas valves and igniters.

Also listed for: DM2562, DM3862, NDM1062, RM2451, RM2454, RM2551, RM2554, RM2663, RM2852, RM3663, RM3762, RM3863, RM3962 and RM4872.

Product details

  • Brand: Dometic
  • Part number: 2932781012
  • Part type: Spark electrode with attached high-tension lead
  • Application: LP gas ignition on Dometic absorption refrigerators

FAQ

My fridge clicks but won't light on propane. Is it the electrode?
It may be. A cracked electrode or the wrong spark gap are common causes. A blocked burner orifice, an empty LP tank or air in the line can cause the same symptom, so check those too.

Do I need a technician?
No. This is a do-it-yourself replacement. If you need help with the install, we're here for you. Just reach out.

Dometic logo

Recommended Products